Minesweeper Patterns
Minesweeper patterns are small groups of numbers that always solve the same way. Learn to spot them and most boards stop needing slow, square-by-square reasoning. You see the shape, flag the mine and open the safe squares. Each pattern below has a diagram; every red and green square in them has been checked with the same exact solver that builds our No-Guess boards.
Last reviewed 2026-11-17
How to Read the Diagrams
- closed square
- proven mine (flag it)
- proven safe (open it)
- the numbers that form the pattern
Light squares are open, and their numbers are the real counts for the mines in the picture. The edges of each diagram are the edges of the board. All of these patterns also work anywhere in the middle of a board, as long as the squares involved are the same.
The Basics: Counting Closed Squares
Every pattern grows out of two rules. If a number has exactly as many closed neighbours as its count, all of them are mines. If a number already has all its mines found, every other closed neighbour is safe.
The 1 in the top row touches only one closed square, so that square is the mine. The 1 below-right of it touches the same mine, so it is satisfied and the two squares on the right are safe.
The 1-1 Pattern Against an Edge
When a 1 sits against a wall, its mine has only two possible squares. If the next number along is also a 1 and it can see both of those squares, its one mine must be one of them. Anything else that second 1 touches is therefore safe.
You don't know which of the two left squares is the mine yet, and you don't need to. The safe squares are enough to keep going. This edge pattern is the single most useful one on the board.
The 1-2 Pattern
A 2 next to a 1 is the mirror image: the 2 shares squares with the 1, but the 1 can only give it one mine. The 2's second mine has to be in a square the 1 can't see.
Along a wall, the square the 2 sees and the 1 doesn't is the far one, so it's a mine. In the open, apply the same logic to whichever squares belong only to the 2.
The 1-2-1 Pattern
A 1-2-1 along a straight edge of closed squares always resolves the same way. The two mines sit directly above the 1s, and the square above the 2 is safe, as are the squares at either end.
Why it works: the 2 needs two mines among its three squares. Each 1 can contribute only one, and the square in the middle is shared by both 1s, so a mine there would satisfy both 1s and leave the 2 one mine short.
The 1-2-2-1 Pattern
The longer cousin: in a 1-2-2-1 line, the mines are above the two 2s and the squares above the 1s are safe.
Think of it as two overlapping 1-2 patterns facing each other. Each 1-2 pushes a mine onto the 2's side, which puts both mines in the middle.
Reduction: Subtract the Flags First
Real boards rarely show a clean 1-2-1. More often the numbers are bigger because some of their mines are already flagged. Subtract the flags each number touches and the familiar pattern appears.
Here the line reads 2-3-2, but the flag below touches all three numbers. Take one away from each and you get 1-2-1, which you already know how to solve. Reduction is how experienced players find patterns everywhere.
The 50/50 You Can't Solve
Some positions have no logical answer. Two closed squares share exactly the same numbers, one of them is a mine, and nothing on the board can tell them apart.
On a classic random board, the best move is to guess early, before you invest time in the rest of the board, or to look for a mine count that settles it at the end. In No-Guess mode this situation never appears: boards that contain one are rebuilt before you play.
Practising Patterns
- Start on Intermediate. Its boards are dense enough to show patterns often but small enough to finish quickly.
- Before each move, name the pattern you are using. After a few games you'll stop needing to.
- When you lose, press Undo and find the pattern you missed. That habit builds speed faster than playing more games.
- New to the rules? Start with how to play Minesweeper, then come back here.
Spot a 1-2-1 on a real board: play minesweeper